guidelok horizontal

Upper run guide for long travels, unsupported in swarf areas

Metal chips are a problem, especially in machine tools on long travels, when energy chain sliding has to be used. guidelok is the cost-effective solution for travels of up to 50 metres. guidelok horizontal is more cost-effective than many steel chains or complex sliding systems.

Chips cannot get stuck between the sliding surfaces of the upper and lower runners
Modular system with few parts (also possible without lateral trough)
Enormous increase in the unsupported lengths of energy chain
Intelligent upper run guide with swivelling roller holders

Ask for guidelok horizontal now

Horizontal speed
≤ 1m/s

Acceleration
≤ 5m/s2

Typical industries and applications
Machine tools, applications in chip areas, wherever a gliding application is not recommended

System guidelok horizontal, principle drawing:
LLLL = total length / FFFF = field length
Ordering example: Add part no.. with desired value total length and field length e.g. 907.645.200.300.20000/2000.0

Product range | Series 907.645 | For bend radii up to 300mm

Part number	For series	Inner width Bi:	Bend radius
907.645.Bi.R.LLLL/FFFF	E4.56	50 - 600	150 \| 175 \| 200 \| 250 \| 300
907.645.Bi.R.LLLL/FFFF	E4.80	50 - 600	150 \| 175 \| 200 \| 250 \| 300
907.645.Bi.R.LLLL/FFFF	E4.112	50 - 600	200 \| 250\| 300
907.645.Bi.R.LLLL/FFFF	R4.56	75 - 462	150 \| 175 \| 200 \| 250 \| 300
907.645.Bi.R.LLLL/FFFF	R4.80	150 - 462	175 \| 200 \| 250 \| 300
907.645.Bi.R.LLLL/FFFF	R4.112	200 - 500	250 \| 300

Product range | Series 907.837 | For bend radii from 350 up to 500mm

Part number	For series	Inner width Bi:	Bend radius
907.837.Bi.R.LLLL/FFFF	E4.56	200 - 600	\| 350 \| 400 \| 450 \| 500 \|
907.837.Bi.R.LLLL/FFFF	E4.80	200 - 600	\| 350 \| 400 \| 450 \| 500 \|
907.837.Bi.R.LLLL/FFFF	E4.112	200 - 600	\| 350 \| 400 \| 450 \| 500 \|
907.837.Bi.R.LLLL/FFFF	R4.56	200 - 462	\| 350 \| 400 \| 450 \| 500 \|
907.837.Bi.R.LLLL/FFFF	R4.80	200 - 462	\| 350 \| 400 \| 450 \| 500 \|
907.837.Bi.R.LLLL/FFFF	R4.112	200 - 500	\| 350 \| 400 \| 450 \| 500 \|

Design principle

The horizontal guidelok guides the upper run of the energy chain on special swivelling roller holders, which can fold into the moving radius of the energy chain and guarantee unhindered "travel" of the system.

energy chain guided in the channel only travels with the radius past the swivelling roller holders...

... Roller holders swivel in and out again after the radius ...

...the upper run then rests on the roller holders.

Realised in practice

guidelok horizontal is used in the horizontal turning machine of the Spanish machine manufacturer Tornos Gurutzpe S.A.. Thanks to this innovative design of the guidelok horizontal, no chips can get stuck between the sliding surfaces of the upper and lower run of the energy chain.

Learn more

guidelok horizontal in milling machines from lid Maho

guidelok-system in combination with the R4.112 series is used in 5-axis milling machines. With the guidelok, the heavy hoses and cables are safely guided in a self-supporting manner and the required 28 m travel lengths can be realised without any problems. The energy chain is also designed for high speeds and accelerations, a long service life and quick and easy installation.

Learn more

Consulting

I look forward to answering your questions

Dieter Reitz+49 2203 9649 7070 Write e-mail

Shipping and consultation

In person:

Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.

Online:
24h

WhatsApp-Service:
Montag – Freitag: 8 – 16 Uhr