Cable guidance on the FANUC CRX

igus is FANUC CRX Equipment Partner

Suitable for CRX-10iA + CRX-10iA/L
Since May 2021, igus® has been a proud equipment partner of FANUC for the CRX-10iA and CRX-10iA/L collaborative robots.
To ensure clean and, above all, safe guidance of cable and hose on the CRX robot, we offer the right fastening options with the igus® cobot clamps as well as extra protection with the robust triflex® R energy chain.
You can choose between the open TRE chain, the closed TRC chain or the light TRL chain. You can choose between sizes 30 and 40 for the 3 versions.

Fastening points axis 1 & 6

Connection to axis 6

To mount the triflex® R chain at the optimum distance from the axis 6, we also offer the matching tension clamp.
This is fixed to the robot with two screws and the clamp also has 2 holes at the other end to fit a mounting bracket(TL.40.01.Z2).

Connection axis 1

Each cobot clamp comes with a 1 metre Velcro strap, which enables it to be mounted on axis 1 of the CRX.
In this case, the mounting bracket is mounted on the clamp rotated by 90°, thereby ensuring a reliable connection between the cobot, clamp, Velcro strap, mounting bracket and triflex® chain.
The Velcro tape also has a non-slip, silicone-free coating on the inside, which further increases the grip on the robot.

Installing a triflex R energy supply system on the FANUC CRX

Installing the energy supply on the CRX robot is quick and easy and requires only a few tools (scissors, hexagon socket, screwdriver).

The following parts were used in the video:

2 m TRE.40.058.0.B
1x clamp for axis 6(TR.919.582)
5x TR.COB.01.40.Z0.0 (clamp without strain relief)
1x TR.COB.01.40.Z1.0 (clamp with strain relief)

Cobot clamp range

Hook and loop clamp

1x plastic holder
1m Velcro tape
most favourable clamp in the range
silicone-free
maximum freedom for cable routing

Buy a standard clamp

Clamp without strain relief

Cobot clamp with mounting bracket, no strain relief

1x plastic holder
1m Velcro tape
1x light mounting bracket size 30 or 40
suitable for TRE, TRC & TRL in size 30 or 40
silicone-free

Buy a clamp without strain relief

Clamp with strain relief

1x plastic holder
1m Velcro tape
1x light mounting bracket size 30 or 40
In size 40 optionally with long and short strain relief teeth
Suitable for TRE, TRC & TRL in size 30 or 40
silicone-free

Buy a clamp with strain relief

Clamp protector

1x plastic holder
1m Velcro tape
1x round protector size 40
Protector can carry TRE, TRC & TRL in size 40
silicone free

Buy a clamp protector

PMA hose clamp

1x plastic holder
1m Velcro tape
PMA clip
available in 5 sizes for corrugated hoses with diameter:
Ø17 mm, Ø23 mm, Ø29 mm, Ø36 mm and Ø48 mm
silicone-free

Buy a PMA clamp

e-chain that goes with the cobot clamp

Size index 30 or 40

Closed type TRC with 100 % optical and physical protection for cable and hose
⇒ directly to the TRC shop

Simply insert the cable and hoses into the e-chain® from the outside
⇒ directly to the TRE Shop

Very open but also very light and cable and hose can be inserted from the outside
⇒ directly to the TRL Shop

CRX in the configurator

We have put together ready-made packages for the CRX-10iA and CRX-10iA/L and packed them into the online configurator.
All you have to do in the configurator is select