Change Language :
E4.1 - ONE e-chain® series for almost all applications
The E4.1 system combines all the advantages of its three predecessors and is the best igus energy chain in the product range. The E4.1 series is stronger with the same or smaller dimensions than its predecessors. Almost all accessory components and connection dimensions are identical. With the igus E4.1 system, you can further increase the service life of your application and bring cost down at the same time.
- Robust, quiet, modular. System E4.1 - utilised advantages of the proven E4 series
- Opening the energy chain: Press the groove of the crossbar vertically with a screwdriver. Release with a lever movement (against the flange)
- Straight running and quick assembly thanks to the inner/outer link principle. Very high stiffness, high load capacity with lateral forces due to undercut design
e-chain® with crossbars every link, openable from both sides - robust version
Series E4.21
inner height hi: 21mm
inner width Bi: 30 - 120mm
bend radius R: 38 - 200mm
pitch: 30.5mm
Series E4.28
inner height hi: 28mm
inner width Bi: 40 - 300mm
bend radius R: 55 - 250mm
pitch: 46mm
Series E4.32
inner height hi: 32mm
inner width Bi: 50 - 400mm
bend radius R: 63 - 300mm
pitch: 56mm
Series E4.42
inner height hi: 42mm
inner width Bi: 50 - 400mm
bend radius R: 75 - 350mm
pitch: 67mm
Series E4.56
inner height hi: 56mm
inner width Bi: 50 - 600mm
bend radius R: 135 - 500mm
pitch: 91mm
Series E4.80
inner height hi: 80mm
inner width Bi: 50 - 600mm
bend radius R: 150 - 1000mm
pitch: 111mm
Series E4.112
inner height hi: 112mm
inner width Bi: 50 - 600mm
bend radius R: 200 - 1000mm
pitch: 143mm
Series E4.162
inner height hi: 162mm
inner width Bi: 200 - 600mm
bend radius R: 250 - 1000mm
pitch: 200mm
Series 800
inner height hi: 200mm
inner width Bi: 200 - 600mm
bend radius R: 325 - 1000mm
pitch: 250mm
Series 840
inner height hi: 204mm
inner width Bi: 100 - 563mm
bend radius R: 325 - 1000mm
pitch: 250mm
Series E4.350
inner height hi: 350mm
inner width Bi: 400 - 800mm
bend radius R: 500 - 1000mm
pitch: 470mm
e-chain® with crossbars every 2nd link, openable from both sides - standard version
Series H4.32
inner height hi: 32mm
inner width Bi: 50 - 400mm
bend radius R: 63 - 300mm
pitch: 56mm
Series H4.42
inner height hi: 42mm
inner width Bi: 50 - 400mm
bend radius R: 75 - 350mm
pitch: 67mm
Series H4.56
inner height hi: 56mm
inner width Bi: 50 - 600mm
bend radius R: 135 - 500mm
pitch: 91mm
Series H4.80
inner height hi: 80mm
inner width Bi: 50 - 600mm
bend radius R: 150 - 1000mm
pitch: 111mm
e-tube, openable from both sides, pivoting lid - protection against chips and dirt
Series R4.28
inner height hi: 28mm
inner width Bi: 50 - 300mm
bend radius R: 63 - 250mm
pitch: 46mm
Series R4.32
inner height hi: 32mm
inner width Bi: 50 - 300mm
bend radius R: 125 - 300mm
pitch: 56mm
Series R4.42
inner height hi: 42mm
inner width Bi: 50 - 300mm
bend radius R: 125 - 350mm
pitch: 67mm
Series R4.56
inner height hi: 56mm
inner width Bi: 75 - 462mm
bend radius R: 150 - 500mm
pitch: 91mm
Series R4.80
inner height hi: 80mm
inner width Bi: 150 - 460mm
bend radius R: 200 - 1000mm
pitch: 111mm
Series R4.112
inner height hi: 112mm
inner width Bi: 200 - 400mm
bend radius R: 250 - 1000mm
pitch: 143mm
Guide corrugated tubes in parallel
E4.1L TUB - Guide corrugated tubes safely parallel to an e-chain®
Run corrugated tubes in parallel
Assembly tool
For easy opening and closing of the E4 series. Saves a lot of time during assembly.
Go to product selection
Snap-on clip - clip-on cable tiewrap
Snap-on clip - clip-on cable tiewrap, as clip-on lateral guidance of surfaces and cables
Snap-on clip - clip-on cable tiewrap
Glide pads for energy chains
Friction- and wear-optimised sliding elements and rol e-chain extend the service life of igus energy chain in sliding operation.
To the productConsulting
I look forward to answering your questions
Dieter Reitz+49 2203 9649 7070Write e-mail
Shipping and consultation
In person:
Monday to Friday from 7 am - 8 pm.
Saturdays from 8 am- 12 pm.
Online:
24h
WhatsApp-Service:
Montag – Freitag: 8 – 16 Uhr