e-spool® microphone and e-spool® microphone stereo

Slip-ring-free and compact up to 30m travel

The microphone motorised winch fills a gap in the field of sound technology and is particularly versatile thanks to its compact size and lightweight feature. The use of the twisterband eliminates the need for a slip ring. Uninterrupted sound transmission can thus be guaranteed, for an extension length of 30m. With the e-spool microphone stereo, two cables are guided in parallel so that two microphones can be connected. Both systems are supplied complete with motor and control system, the e-spool® microphone stereo also comes with a microphone rail for two microphones.

Request e-spool microphone now

Operating environments:
The environment and dynamics of the e-spool® microphone are optimised for indoor use. For outdoor applications, the system must be protected against wind and weather.

Technical details:

max. speed

max. Acceleration

Temperature range

max. Cable diameter

Equipment

Not included in scope of delivery

0.5 m/s

0.5 m/s2

0°C to +80°C

ø 8.5 mm

Special XLR cable 2x(2x0.14 mm²)C

Microphone, connector

Try it out at home or in the office and get a first impression
With our new, free augmented reality service, you can test the e-spool® microphone immediately. Access the service with your PC and scan the QR code with your smart device for the AR model or click on the link directly with your smart device.

Test the augmented-reality service here

Tech up

Best audio quality without cable interruption/slip-ring-free
No slip ring, so no cable interruption
Different media and diameters possible in one drum
Adaptable to technological development by simple cable replacement
No manual work at height
Space-saving, since the cable retracts into the starting position

Cost down

No additional carrying device required for the microphone
Low raw material use, since there is no slip ring and less copper
No additional copper components in the system (apart from cable copper)
Contact points and sliding contacts no longer require replacement/maintenance

Proof

twisterband proven as a slip ring alternative in hundreds of e-spool® applications
Fulfils the requirements of DIN EN17206 and DGUV Principle 315-390
Custom designed and tested system

Sustainability

Contact points and sliding contacts no longer require replacement/maintenance
Have your energy or drag chain recycled at the end of its life cycle in the igus® [Link extid="2906" title="chainge Recycling Programm"]. Irrespective of the manufacturer. You will receive a voucher.

e-spool® microphone stereo

Our well-known e-spool microphone gets a variant that enables the guidance of two shielded special cables. The e-spool microphone stereo therefore offers a connection for two microphones.

Request e-spool microphone stereo now