e-skin® flat with support chain SKF.S

The e-skin® flat support chain SKF.S is an addition to the e-skin® flat. The support chain is easy to add and therefore enables unsupported travel paths. The support chain can be combined with the SKF12C and SKF15C.

Part No.	Outer width Ba	External height Ha	Bend radius R
SKF.S.08	8mm	8mm	40 / 70 / 100mm
SKF.S.10	10mm	10mm	125mm

To the e-skin flat configurator

SKF.S.10.125.01.0 e-skin® flat with support chain

The new e-skin® flat with support chain enables longer travels of up to 5 metres with the cleanroom-optimised e-skin® flat system. The new larger e-skin® flat with support chain is guided in the POD SKF15C e-skin® flat and can be integrated into the existing mounting bracket structure.

Part No.	Inner height [mm]	Outer height [mm]	Bend radius [mm]	Pitch [mm]	Spacer mounting bracket
SKF.S.10.125.01.0	10	10	125	30	SKFC.SP20

SKF.S.10.125.01.0 Support chain for the e-skin® flat

Compare SKF.S.08 and SKF.S.10

Tech up

Suitable for clean rooms according to IPA cleanroom Class 1, also for the three-layered e-skin flat
Available in two versions: closed and openable with a special closure system
Available with support e-chain for longer unsupported lengths
Can be combined with SKF12C and SKF15
Stackable, width-variable mounting brackets
Modular and compact design
Defined bend radius for applications with e-skin flat
Profile for cleanroom applications with compact installation spaces
e-skin flat with support chain with enclosed e-chain<br />to prevent abrasion
Fast cable filling thanks to openability

Cost down

Monitoring of the sag via ultrasonic measurement with replacement recommendation - optionally with the i.Cee EC.S Additional module
Individual cables can be changed quickly without replacing the entire energy supply
Can be shortened or widened
No minimum order quantity
Flexible standard modular system, no special production
IPA ISO Class 1 chainflex cables with 36-month guarantee

Proof

IPA cleanroom class 1 for the three-layered e-skin flat: Material/stranded structure* tested by IPA according to ISO 14644-14, report IG 2107-1242

*The following cables are listed in the certificate: CFCLEAN3.01.05.02 and CAPU.A.06.0 - Further tests are at present are not scheduled.

Sustainability

Leave your energy or drag chain at the end of its life cycle at igus® chainge Recycling Programme utilise.

Matching accessories

Spacer

Spacer for the connection element. Lower height of the connection element possible and therefore even more compact. Now available in 3 sizes: SP12, SP16 and SP20.

Support chain with ultrasonic sensor

i.Cee EC.S - new ultrasonic sensor on the support chain of the e-skin® flat enables condition-based maintenance messages in the cleanroom.

e-skin® flat SKF.S is equipped with a self-supporting length and a defined bend radius.

Support chain SKF.S for the closed single pod SKF12C.

Variable width e-skin® mounting bracket available upon request. They can be stacked as required.

e-skin® flat as a support chain in an enclosed e-chain® to prevent abrasion.

e-skin flat single pods

Freely fillable cable routing system. Particularly compact design. Modular design thanks to interconnectable profiles.

More e-skin series

run cables with e-skin® safely and abrasion-resistant in cleanrooms.

Go to e-skin overview

Cleanroom energy chains

Discover more energy chains up to ISO class 1 for cleanroom applications here.

To the cleanroom energy chains

e-skin® flat Application example

Linear system with air bearings

igus® e-skin® flat SKF12.4.03.1.01 is used in a linear system with air bearings. The e-skin flat has no minimum order quantity, shows almost no visible wear and tear and can be implemented in the smallest installation space.

Learn more