Series 340 - snap-open along inner radius

Option 1: Vertical separators and spacers Vertical separators are used if a vertical subdivision of the Energy Chain® interior is required. By standard, vertical separators are assembled every other Energy Chain® link.

Standard separator 301 for Energy Chains® This separator is used for general subdivision of Energy Chain®.

NOTE ON SPACERS
Vertical separators are adjustable, but can be fixed in position by means of a spacer. Spacers are most often necessary for side mounted applications. The available inner height is reduced by .08” (2mm) per spacer (for example if one spacer is placed on either side of the separator, the overall inner height is reduced by .16” (4mm). To avoid this, place the spacers on the outside of the opening crossbar (not for long travels).

Option 2: Full-width shelf This option is available for the snap-open Series 340/350 chains. It is ideal for use in applications involving many thin cables with similar or identical diameters. This shelf slides into place and spans the entire width of the chain.

Slotted separator 302 for Energy Chains®
This component is used to form the basic pattern of a shelf system.

Slotted separator 302-24 for Energy Chains®
This separator features a wide base. It can be used in side mounted applications.

Option 3: Shelves This option is available for the Series 340/350 snap-open chains. It is ideal for use in applications involving many cables with different diameters. This option allows for variable compartment heights and widths across the chain width, but can also be used for level separation across the entire width.

Slotted separator 303 for Energy Chains®
This component is used to form the basic pattern of a shelf system.

Slotted separator 304 for Energy Chains®
This component is used to form the basic pattern of a shelf system.

Shelves 2200-XX
These components form the basic pattern of a shelf system. Shelves of various widths can be arranged at 5 different heights in .20” (5mm) increments

Strain reliefs

Strain reliefs

Strain reliefs

Strain reliefs

Strain reliefs

• Excellent wear and noise levels
• Very easy, universal assembly

1. Interface connector

2. Glide bar, plastic

3. Bottom clamp

4. Glide strips

5. C-profile

• Excellent wear and noise levels
• Very easy, universal assembly

1. Aluminium profile

2. Polymer glide bar

3. Heavy Duty bracket

4. Glide strip

5. C-Profile

6. Silencer profile

+ Easy assembly with installation sets
+ 2-part design - adaptable to chain widths
+ Very stable
+ Economical
+ Large selection

Guide trough without glide bars part no. 93-30, guide trough with glide bars part no. 93-31

Installation sets as a joint connection part no. 93-50. XX