Energy chains for special solutions

• No slip ring
• Without interruption (no slip ring), for energy,
  data, fluids and air
• Space-saving
• Universal assembly
• Constant tensile strain on the cable
• Cost-effective
• Easy in case of repair

Note: Please consider VDE 0298 Part 5 (Current carrying capacity and conversion factors for wound cables) when selecting your cables and when using e-spool flex

• Modular and compact design
• Replace cables quickly
• Suitable for cleanrooms according to IPA ISO Class 1
• High reliability due to balanced stranded structure of CFCLEAN cable
• Available from stock

Long travels and very high traversing speed As an energy chain with crossbars every link or as an enclosed e-tube.

Openable energy chains with mounting brackets and interior separation in electrically conductive ESD material available from stock.

• Space requirement: 80 - 200mm
• Bend radius: 40 - 55mm
• Unsupported length: depends on the guided cables

Unhindered travel: no swarf can settle between the sliding surfaces of the upper and lower runs of the energy chain.

The alternative to a cable reel – reduce cable wear and reliably guide different media.

• Up to 7m/s and 10m/s²
• Up to 80% less trough required, saving cost and weight
• For hanging systems up to 50m

To protect flexible electric cables.

Energy chains and tubes openable from both sides. Inner heights of 32 to 80mm. Especially suitable for "side-mounted" and travel distances of over 200m.

50% stronger than pure plastic energy chains* and 50% lighter than pure steel energy chains*. No rivets, no screws. Energy chain links openable quickly, for easy cable replacement.

• Inner height hi: 42mm
• Outer height ha: 76mm
• Inner widths Bi: 50 - 400mm
• Outer width Ba: 68 - 418mm
• Bend radii R: 100mm
• Pitch: 67mm

50% stronger than pure plastic energy chains* and 50% lighter than pure steel energy chains*. No rivets, no screws. Energy chain links openable quickly, for easy cable replacement.

• Inner height hi: 56mm
• Outer height ha: 90
• Inner widths Bi: 50 - 600mm 
• Outer width Ba: 74 - 624mm
• Bend radius R: 100 - 500mm 
• Pitch: 91mm

Exterior stop-dogs prevent the accumulation of dust. All existing widths can be combined.

• Allows unrestricted rotation of the hose on the ball screw
• The length of the connection depends on the length of the ball screw of the SCARA robot.
• Enables the connection of corrugated hose with e-rib® (which are not included in the product)
• Available for SCARA Robots manufacturer: Epson, ABB, Yaskawa, Fanuc, Denso & Kuka

• Complete set of corrugated hose and e-rib®
• Available in different lengths 
• Inner diameter of the corrugated hose is 29mm